How to Solve “Access is Denied” Issue When Fixing Boot Configuration with Bootrec /fixboot (2 Solutions)

Introduction

Hi guys, this is Jude from Easy Techs. In this video, I’ll be showing you two possible ways to fix the problem of “access is denied” when trying to run the bootrec fix boot command in Windows. This command is typically used to resolve various startup issues you may encounter in Windows, such as failure to start, hardware or software changes causing problems, blue screen of death, missing boot device, etc. The bootrec command rebuilds the Boot Configuration Data (BCD) file when it is missing, corrupt, or improperly configured, making it an important tool for troubleshooting Windows startup issues.

Recreating EFI Directory Structure

The first method is to recreate the EFI directory structure and reconfigure the boot file using the BCD boot command. To do this:
1. Open the terminal and type “diskpart” followed by “list disk” to display all disks attached to your PC.
2. Select the disk with your Windows files (usually Disk 0) and then select the volume with the system reserved partition.
3. Assign a drive letter to this volume, create the EFI directory structure, and run the bootrec fixboot command.
4. Finally, run the BCD boot command to complete the process.

Using an Earlier Windows 10 Build

If the first method does not work, you can try using an earlier Windows 10 build installation media, such as the 1703 build, to avoid the “access is denied” error. This process involves configuring your USB with the 1703 build and using it to run the bootrec command without errors.

To do this:
1. Format the USB stick and mark it as active using the Disk Management tool.
2. Download the Windows 10 build 1703 installation files and copy them to your USB stick.
3. You can now use this USB to repair any version of Windows without encountering the “access is denied” error.

Remember to follow the instructions in the video for detailed steps on how to perform these methods. If you found this video helpful, give it a thumbs up, share it with others, and subscribe to our channel for more tech support videos. Thank you for watching!

How to Resolve Bootrec /fixboot Access is Denied Issue During Fix Boot Configuration

If you encounter the "Access is Denied" error message while using the bootrec /fixboot command to fix boot configuration issues in Windows, it can be frustrating. However, there are a couple of methods you can try to resolve this issue and successfully repair your system’s boot configuration. In this guide, we will walk you through two possible fixes for the bootrec /fixboot access denied problem.

Method 1: Run Command Prompt as Administrator

One of the most common reasons for the "Access is Denied" error when using the bootrec /fixboot command is that you do not have the necessary administrative permissions. To fix this issue, follow these steps:

Step 1: Open Command Prompt as Administrator

  • Press the Windows key and type "cmd" in the search bar.
  • Right-click on Command Prompt in the search results and select "Run as administrator."

Step 2: Execute the bootrec /fixboot Command

  • In the Command Prompt window, type the following command and press Enter:
    bootrec /fixboot

Step 3: Check the Boot Configuration

  • After the command has been executed successfully, restart your computer and check if the boot configuration issue has been resolved.

Method 2: Use Diskpart to Assign a Drive Letter

If running Command Prompt as administrator does not solve the issue, you can try assigning a drive letter to the system partition using Diskpart. Follow these steps:

Step 1: Open Command Prompt as Administrator

  • Follow the same steps as in Method 1 to open Command Prompt with administrative privileges.

Step 2: Launch Diskpart

  • In the Command Prompt window, type the following command and press Enter:
    diskpart

Step 3: Assign a Drive Letter

  • Type the following commands in Diskpart to assign a drive letter to the system partition:
    list volume
select volume X (Replace X with the volume number of the system partition)
assign letter=Z
exit

Step 4: Run the bootrec /fixboot Command

  • Now, go back to Command Prompt and execute the bootrec /fixboot command again.

By following these two methods, you should be able to resolve the "Access is Denied" issue when using the bootrec /fixboot command to fix boot configuration problems in Windows. If the problem persists, it may indicate a more serious underlying issue with your system that requires further troubleshooting.

Issue with Bootrec /fixboot Access Denied

When trying to fix boot configuration issues using the command prompt, you may encounter an error stating “Access is Denied” when using the command “bootrec /fixboot”. This can be frustrating as it prevents you from successfully repairing your boot configuration. However, there are a couple of fixes you can try to resolve this issue and successfully repair your boot configuration.

Fixes for Bootrec /fixboot Access Denied

To address the “Access is Denied” error when using “bootrec /fixboot”, you can try running the command prompt as an administrator. This elevated level of access may allow you to successfully run the command and fix your boot configuration issues. Alternatively, you can also try using the Diskpart utility to manually assign a drive letter to the system partition before running the “bootrec /fixboot” command. This can help bypass the access denied error and successfully repair your boot configuration.

Conclusion

In conclusion, encountering the “Access is Denied” error when using “bootrec /fixboot” to fix boot configuration issues can be frustrating. However, by running the command prompt as an administrator or using the Diskpart utility to assign a drive letter, you can work around this error and successfully repair your boot configuration. By following these two fixes, you can effectively troubleshoot and resolve boot configuration problems on your Windows system.

Source: Youtube Video https://www.youtube.com/watch?v=lRCyb7FzWFY of Channel EasyTechs.